Belkin Extender Setup - Belkin.Range, WPS, & WPS Pin
There are various methods and options available for setting up your Belkin range extender setup. You can choose the technique that is most appropriate for your device. One can set up the wifi extender using manual or automatic techniques. The extender setup is not a difficult task even if done manually, i.e., Belkin.range. If you follow the given set of instructions properly nothing goes wrong. In this blog, we will discuss three different kinds of setup processes and read them properly to complete the extender setup.
Steps For Belkin Range Setup Via WPS -
You are going to read the easiest method of Belkin extender setup. Move on with this section only if your extender and router support the WPS button. Otherwise, skip to the next section;
Firstly, connect the Wifi router and Belkin range extender.
Press and hold that WPS switch on the Belkin range extender for five seconds.
Release the key and then look at the extender light. You will see the WPS lights flashing.
The indicator tells that WPS has been connected.
Hold and push the WPS button of your router at home within two minutes after initiating WPS via the Belkin extender device.
Steps For Belkin Range Setup Via WPS Pin -
If your router is compatible, you'll discover this PIN on the label of the product, usually at the bottom or back of the router's body or in the router's configuration tool.
The WPS pin differs based on the model and manufacturer, consult your product's manual for more details. Read the following points.
Open your web browser for your mobile or computer device and then go to http://belkin.range setup.
Next, click on Wi-Fi Protected Setup (WPS) in the Extended Network Settings.
Enter your device's WPS password in the Input Client Device PIN field.
After that, click Enroll to complete the registration.
Steps For Belkin Range Setup Via Belkin.Setup -
You can install Belkin wifi extender manually by visiting its official website, i.e., Belkin.setup:
First of all, connect the Belkin wifi range extender to an electrical outlet.
Associate your wifi extender to your main router’s network.
From your PC device or smartphone, navigate to the wifi settings.
Connect it with the Belkin extender’s network by clicking on its SSID.
Thereafter, tap on the Belkin settings.
Launch any desired web browser from the device that is connected to the extender’s network.
Type Belkin.range or 192.168.206.1 in the address bar of the browser.
On the next page, click on the Start Setup option.
After that, it will detect the SSID of wifi networks in your area.
Now, select the router network you want the extender to extend signals of, i.e., your primary router.
Proceed by clicking on the ‘Next’ button.
Enter the credentials for your wifi network.
Check the password you have entered before submitting.
You will see a prompt, ‘Belkin Range Extender Setup complete’.
Comments
Post a Comment