Belkin Range Setup Wirelessly: Simple Instructions to Follow
Steps for 192.168.206.1 Login for Belkin Extender
Go through the below instructions for the Belkin range setup by using the 192.168.206.1 Login:
Step 1: For the successful Belkin router login, you first need to connect your Belkin router to the modem. Alter that, connect it to the computer by using the Ethernet cable.
Step 2: Next, turn on your computer and open a web browser on it of your choice. Enter either http://belkin.range setup or the default IP address 192.168.206.1 in the address bar of the web browser.
Step 3: Once you reached the login window, enter the default username and password. If you have changed the default login credential details, enter the changed ones.
Note: The default username is “admin”. Leave the password field blank.
Step 4: Hit on the login button.
Step 5: Now, you will find the option labeled as the “Internet WAN”. Once you find this option, tap on it. Choose the “Connection Type”.
Step 6: Make sure to choose the correct connection type. Click on the Next button to proceed further. If you want to find the correct “connection type”, connect with the Internet Service Provider.
Step 7: Enter the details properly provided by the ISP provider. Tap on the “Apply Changes”.
Step 8: Once you complete the Belkin extender login process, you will be able to access the internet connection without any cables.
Instructions for Belkin Range Setup
Follow the below steps to install Belkin WiFi extender on your device:
Step 1: The first step is to connect the Belkin router to the modem and then unplug the modem from the power socket.
Step 2: Next, turn on your computer and open a web browser on it of your choice. Enter either http://belkin.range setup or the default IP address 192.168.206.1 in the address bar of the web browser.
Step 3: Open an internet browser of your choice from your computer. To go ahead with the Belkin Range Setup, enter 'http://192.168.2.1' or 'http://belkin.range setup' in the address bar of the internet browser to complete the configuration.
Step 4: Once the setup page is displayed on the screen, tap on the “Detect my connection” button.
Step 5: The setup will identify if the router's firmware needs to be upgraded.
Step 6: Next, you'll be requested to change your network name and password after the connection is established. Fill in the appropriate wireless settings in the fields provided.
Step 7: Click on the 'Save and Continue’ button.
Step 8: Connect to the new SSID after updating new wireless settings.
Step 9: Now, tap on the 'Great, what's next?' button from the drop-down menu.
Step 10: It's time to get your product registered. Click on 'Register later' if you want to skip this step.
Step 11: You are redirected to the dashboard once the belkin.range setup is completed.
By following the above instructions, you can easily install Belkin WiFi extender into your device either through http://belkin.range setup or the default IP address 192.168.206.1 login without any hassle.
Comments
Post a Comment